S5x10 Dimensions
The steel beam dimensions for the S5x10 section can be seen in the table. The depth of the section is 5 in. The width of the section is 3 in.
| Dimension | Value |
|---|---|
| Depth | 5 in |
| Top Width | 3 in |
| Top Thickness | 0.326 in |
| Bottom Width | 3 in |
| Bottom Thickness | 0.326 in |
| Web Thickness | 0.214 in |
| Fillet Radius | 0.424 in |
S5x10 Section Properties
The S5x10 section has an area of 2.93in2. The below table outlines the S5x10 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | J | Iyp | Izp | Alpha | Iw | Plastic Mod Yp | Plastic Mod Xp |
|---|---|---|---|---|---|---|---|
| 2.93 in2 | 0.11 in4 | 1.19 in4 | 12.3 in4 | 0 deg | 6.52 in6 | 1.37 in3 | 5.66 in3 |
Materials and Design Standards S5x10
This section is typically designed using the design standard AISC 360-16 LRFD and is manufactured using a hot rolled process as it is a steel section.
