75U50-54 Dimensions
The steel beam dimensions for the 75U50-54 section can be seen in the table. The depth of the section is 0.75 in. The width of the section is 0.5 in.
| Dimension | Value |
|---|---|
| Depth | 0.75 in |
| Top Width | 0.5 in |
| Top Thickness | 0.0566 in |
| Bottom Width | 0.5 in |
| Bottom Thickness | 0.0566 in |
| Web Thickness | 0.0566 in |
| Fillet Radius | 0.0566 in |
75U50-54 Section Properties
The 75U50-54 section has an area of 0.09in2. The below table outlines the 75U50-54 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Izp | rzp | Iyp | ryp | J | Iw |
|---|---|---|---|---|---|---|
| 0.09 in2 | 0.01 in4 | 0.29 in | 0 in4 | 0.16 in | 0 in4 | 0 in6 |
Materials and Design Standards 75U50-54
This section is typically designed using the design standard AISI S100-12 LRFD and is manufactured using a cold formed process as it is a steel section.
