400SFT150-D25 Dimensions
The steel beam dimensions for the 400SFT150-D25 section can be seen in the table. The depth of the section is 4 in. The width of the section is 1.5 in.
| Dimension | Value |
|---|---|
| Depth | 4 in |
| Top Width | 1.5 in |
| Top Thickness | 0.0155 in |
| Bottom Width | 1.5 in |
| Bottom Thickness | 0.0155 in |
| Web Thickness | 0.0155 in |
| Fillet Radius | 0.086 in |
400SFT150-D25 Section Properties
The 400SFT150-D25 section has an area of 0.11in2. The below table outlines the 400SFT150-D25 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Izp | rzp | Iyp | ryp | J | Iw |
|---|---|---|---|---|---|---|
| 0.11 in2 | 0.28 in4 | 1.6 in | 0.02 in4 | 0.46 in | 0 in4 | 0.07 in6 |
Materials and Design Standards 400SFT150-D25
This section is typically designed using the design standard AISI S100-12 LRFD and is manufactured using a cold formed process as it is a steel section.
