TS12010 Dimensions
The steel beam dimensions for the TS12010 section can be seen in the table. The depth of the section is 120 mm. The width of the section is 120 mm.
| Dimension | Value |
|---|---|
| Depth | 120 mm |
| Left Flange Width | 26 mm |
| Right Flange Width | 26 mm |
| Top Width | 40 mm |
| Thickness | 1 mm |
| Fillet Radius | 2.5 mm |
| Lip Depth | 4 mm |
| Hat Angle | 33.64028766831422 mm |
| Lip Angle | 45 mm |
TS12010 Section Properties
The TS12010 section has an area of 365mm2. The below table outlines the TS12010 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | J | Iyp | Izp | ryp | rzp | Iw | Cz |
|---|---|---|---|---|---|---|---|
| 365 mm2 | 123.2 mm4 | 694000 mm4 | 701000 mm4 | 43.6 mm | 43.3 mm | 457000000 mm6 | 84.5 mm |
Materials and Design Standards TS12010
This section is typically designed using the design standard AS 4600-2005 and is manufactured using a cold formed process as it is a steel section.
