TS4075 Dimensions
The steel beam dimensions for the TS4075 section can be seen in the table. The depth of the section is 40 mm. The width of the section is 40 mm.
| Dimension | Value |
|---|---|
| Depth | 40 mm |
| Left Flange Width | 12 mm |
| Right Flange Width | 12 mm |
| Top Width | 32 mm |
| Thickness | 0.75 mm |
| Fillet Radius | 2.5 mm |
| Lip Depth | 6 mm |
| Hat Angle | 15.33731801658595 mm |
| Lip Angle | 44 mm |
TS4075 Section Properties
The TS4075 section has an area of 113mm2. The below table outlines the TS4075 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | J | Iyp | Izp | ryp | rzp | Iw | Cz |
|---|---|---|---|---|---|---|---|
| 113 mm2 | 21.23 mm4 | 54000 mm4 | 28000 mm4 | 21.84 mm | 15.72 mm | 4661000 mm6 | 37.5 mm |
Materials and Design Standards TS4075
This section is typically designed using the design standard AS 4600-2005 and is manufactured using a cold formed process as it is a steel section.
