WA Ceiling Batten Dimensions
The steel beam dimensions for the WA Ceiling Batten section can be seen in the table. The depth of the section is 25 mm. The width of the section is 25 mm.
| Dimension | Value |
|---|---|
| Depth | 25 mm |
| Left Flange Width | 12 mm |
| Right Flange Width | 12 mm |
| Top Width | 27 mm |
| Thickness | 0.42 mm |
| Fillet Radius | 0.42 mm |
| Lip Depth | 0 mm |
| Hat Angle | 24.5 mm |
| Lip Angle | 0 mm |
WA Ceiling Batten Section Properties
The WA Ceiling Batten section has an area of 43.4mm2. The below table outlines the WA Ceiling Batten section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Izp | Iyp | rz | ry | J | Iw |
|---|---|---|---|---|---|---|
| 43.4 mm2 | 4430 mm4 | 13300 mm4 | 10.1 mm | 17.5 mm | 2.55 mm4 | 500000 mm6 |
Materials and Design Standards WA Ceiling Batten
This section is typically designed using the design standard AS 4600-2005 and is manufactured using a cold formed process as it is a steel section.
