DT6475H Dimensions
The steel beam dimensions for the DT6475H section can be seen in the table. The depth of the section is 64 mm. The width of the section is 50 mm.
| Dimension | Value |
|---|---|
| Depth | 64 mm |
| Top Width | 50 mm |
| Top Thickness | 0.75 mm |
| Bottom Width | 50 mm |
| Bottom Thickness | 0.75 mm |
| Web Thickness | 0.75 mm |
| Fillet Radius | 0.75 mm |
DT6475H Section Properties
The DT6475H section has an area of 123mm2. The below table outlines the DT6475H section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| Cz | A | Izp | Iyp | rzp | ryp | Iw | J |
|---|---|---|---|---|---|---|---|
| 15.98 mm | 123 mm2 | 94550 mm4 | 32610 mm4 | 27.73 mm | 16.28 mm | 25160000 mm6 | 23.06 mm4 |
Materials and Design Standards DT6475H
This section is typically designed using the design standard AS 4600-2005 and is manufactured using a cold formed process as it is a steel section.
