DT921H Dimensions
The steel beam dimensions for the DT921H section can be seen in the table. The depth of the section is 92 mm. The width of the section is 50 mm.
| Dimension | Value |
|---|---|
| Depth | 92 mm |
| Top Width | 50 mm |
| Top Thickness | 1 mm |
| Bottom Width | 50 mm |
| Bottom Thickness | 1 mm |
| Web Thickness | 1 mm |
| Fillet Radius | 1 mm |
DT921H Section Properties
The DT921H section has an area of 192mm2. The below table outlines the DT921H section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| Cz | A | Izp | Iyp | rzp | ryp | Iw | J |
|---|---|---|---|---|---|---|---|
| 13.95 mm | 192 mm2 | 285420 mm4 | 48650 mm4 | 38.56 mm | 15.92 mm | 79110000 mm6 | 64 mm4 |
Materials and Design Standards DT921H
This section is typically designed using the design standard AS 4600-2005 and is manufactured using a cold formed process as it is a steel section.
