75x50x5 UA Dimensions
The steel beam dimensions for the 75x50x5 UA section can be seen in the table. The depth of the section is 75 mm. The width of the section is 50 mm.
| Dimension | Value |
|---|---|
| Depth | 75 mm |
| Bottom Width | 50 mm |
| Bottom Thickness | 4.6 mm |
| Left Thickness | 4.6 mm |
| Fillet Radius | 0 mm |
75x50x5 UA Section Properties
The 75x50x5 UA section has an area of 555mm2. The below table outlines the 75x50x5 UA section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | J | Iyp | Izp | Alpha | Cy | Cz | Iw | Plastic Mod Yp | Plastic Mod Xp |
|---|---|---|---|---|---|---|---|---|---|
| 555 mm2 | 4090 mm4 | 65900 mm4 | 369000 mm4 | 23.8 deg | 23.9 mm | 11.6 mm | 0 mm6 | 5060 mm3 | 12600 mm3 |
Materials and Design Standards 75x50x5 UA
This section is typically designed using the design standard AS 4100-1998 and is manufactured using a hot rolled process as it is a steel section.
