100x50x20x2 Dimensions
The steel beam dimensions for the 100x50x20x2 section can be seen in the table. The depth of the section is 100 mm. The width of the section is 50 mm.
| Dimension | Value |
|---|---|
| Depth | 100 mm |
| Top Width | 50 mm |
| Top Thickness | 2 mm |
| Bottom Width | 50 mm |
| Bottom Thickness | 2 mm |
| Web Thickness | 2 mm |
| Fillet Radius | 3 mm |
| Lip Depth | 20 mm |
100x50x20x2 Section Properties
The 100x50x20x2 section has an area of 450mm2. The below table outlines the 100x50x20x2 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | J | Cz | Cy | Izp | Iyp | rzp | ryp | Plastic Mod Xp | Plastic Mod Yp | Alpha |
|---|---|---|---|---|---|---|---|---|---|---|
| 450 mm2 | 620 mm4 | 18.6 mm | 50 mm | 705000 mm4 | 167000 mm4 | 39.6 mm | 19.3 mm | 16500 mm3 | 8220 mm3 | 0 deg |
Materials and Design Standards 100x50x20x2
This section is typically designed using the design standard EN1993-1-3:2006 and is manufactured using a cold formed process as it is a steel section.
