100x50x20x4 Dimensions
The steel beam dimensions for the 100x50x20x4 section can be seen in the table. The depth of the section is 100 mm. The width of the section is 50 mm.
| Dimension | Value |
|---|---|
| Depth | 100 mm |
| Top Width | 50 mm |
| Top Thickness | 4 mm |
| Bottom Width | 50 mm |
| Bottom Thickness | 4 mm |
| Web Thickness | 4 mm |
| Fillet Radius | 6 mm |
| Lip Depth | 20 mm |
100x50x20x4 Section Properties
The 100x50x20x4 section has an area of 841mm2. The below table outlines the 100x50x20x4 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | J | Cz | Cy | Izp | Iyp | rzp | ryp | Plastic Mod Xp | Plastic Mod Yp | Alpha |
|---|---|---|---|---|---|---|---|---|---|---|
| 841 mm2 | 4780 mm4 | 18.4 mm | 50 mm | 1230000 mm4 | 277000 mm4 | 38.3 mm | 18.2 mm | 29800 mm3 | 14500 mm3 | 0 deg |
Materials and Design Standards 100x50x20x4
This section is typically designed using the design standard EN1993-1-3:2006 and is manufactured using a cold formed process as it is a steel section.
