200x75x25x3 Dimensions
The steel beam dimensions for the 200x75x25x3 section can be seen in the table. The depth of the section is 200 mm. The width of the section is 75 mm.
| Dimension | Value |
|---|---|
| Depth | 200 mm |
| Top Width | 75 mm |
| Top Thickness | 3 mm |
| Bottom Width | 75 mm |
| Bottom Thickness | 3 mm |
| Web Thickness | 3 mm |
| Fillet Radius | 4.5 mm |
| Lip Depth | 25 mm |
200x75x25x3 Section Properties
The 200x75x25x3 section has an area of 1130mm2. The below table outlines the 200x75x25x3 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | J | Cz | Cy | Izp | Iyp | rzp | ryp | Plastic Mod Xp | Plastic Mod Yp | Alpha |
|---|---|---|---|---|---|---|---|---|---|---|
| 1130 mm2 | 3490 mm4 | 23.2 mm | 100 mm | 6870000 mm4 | 863000 mm4 | 77.8 mm | 27.6 mm | 80800 mm3 | 24900 mm3 | 0 deg |
Materials and Design Standards 200x75x25x3
This section is typically designed using the design standard EN1993-1-3:2006 and is manufactured using a cold formed process as it is a steel section.
