225x75x25x3 Dimensions
The steel beam dimensions for the 225x75x25x3 section can be seen in the table. The depth of the section is 225 mm. The width of the section is 75 mm.
| Dimension | Value |
|---|---|
| Depth | 225 mm |
| Top Width | 75 mm |
| Top Thickness | 3 mm |
| Bottom Width | 75 mm |
| Bottom Thickness | 3 mm |
| Web Thickness | 3 mm |
| Fillet Radius | 4.5 mm |
| Lip Depth | 25 mm |
225x75x25x3 Section Properties
The 225x75x25x3 section has an area of 1210mm2. The below table outlines the 225x75x25x3 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | J | Cz | Cy | Izp | Iyp | rzp | ryp | Plastic Mod Xp | Plastic Mod Yp | Alpha |
|---|---|---|---|---|---|---|---|---|---|---|
| 1210 mm2 | 3720 mm4 | 21.9 mm | 112.5 mm | 9070000 mm4 | 896000 mm4 | 86.6 mm | 27.2 mm | 95500 mm3 | 25300 mm3 | 0 deg |
Materials and Design Standards 225x75x25x3
This section is typically designed using the design standard EN1993-1-3:2006 and is manufactured using a cold formed process as it is a steel section.
