225x75x25x4 Dimensions
The steel beam dimensions for the 225x75x25x4 section can be seen in the table. The depth of the section is 225 mm. The width of the section is 75 mm.
| Dimension | Value |
|---|---|
| Depth | 225 mm |
| Top Width | 75 mm |
| Top Thickness | 4 mm |
| Bottom Width | 75 mm |
| Bottom Thickness | 4 mm |
| Web Thickness | 4 mm |
| Fillet Radius | 6 mm |
| Lip Depth | 25 mm |
225x75x25x4 Section Properties
The 225x75x25x4 section has an area of 1580mm2. The below table outlines the 225x75x25x4 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | J | Cz | Cy | Izp | Iyp | rzp | ryp | Plastic Mod Xp | Plastic Mod Yp | Alpha |
|---|---|---|---|---|---|---|---|---|---|---|
| 1580 mm2 | 8730 mm4 | 21.8 mm | 112.5 mm | 11660000 mm4 | 1120000 mm4 | 85.9 mm | 26.6 mm | 124000 mm3 | 32800 mm3 | 0 deg |
Materials and Design Standards 225x75x25x4
This section is typically designed using the design standard EN1993-1-3:2006 and is manufactured using a cold formed process as it is a steel section.
