75x45x15x2 Dimensions
The steel beam dimensions for the 75x45x15x2 section can be seen in the table. The depth of the section is 75 mm. The width of the section is 45 mm.
| Dimension | Value |
|---|---|
| Depth | 75 mm |
| Top Width | 45 mm |
| Top Thickness | 2 mm |
| Bottom Width | 45 mm |
| Bottom Thickness | 2 mm |
| Web Thickness | 2 mm |
| Fillet Radius | 3 mm |
| Lip Depth | 15 mm |
75x45x15x2 Section Properties
The 75x45x15x2 section has an area of 360mm2. The below table outlines the 75x45x15x2 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | J | Cz | Cy | Izp | Iyp | rzp | ryp | Plastic Mod Xp | Plastic Mod Yp | Alpha |
|---|---|---|---|---|---|---|---|---|---|---|
| 360 mm2 | 499 mm4 | 17.1 mm | 37.5 mm | 325000 mm4 | 103000 mm4 | 30 mm | 16.9 mm | 10100 mm3 | 5610 mm3 | 0 deg |
Materials and Design Standards 75x45x15x2
This section is typically designed using the design standard EN1993-1-3:2006 and is manufactured using a cold formed process as it is a steel section.
