250x75x4 Dimensions
The steel beam dimensions for the 250x75x4 section can be seen in the table. The depth of the section is 250 mm. The width of the section is 75 mm.
| Dimension | Value |
|---|---|
| Depth | 250 mm |
| Top Width | 75 mm |
| Top Thickness | 4 mm |
| Bottom Width | 75 mm |
| Bottom Thickness | 4 mm |
| Web Thickness | 4 mm |
| Fillet Radius | 4 mm |
250x75x4 Section Properties
The 250x75x4 section has an area of 1550mm2. The below table outlines the 250x75x4 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | J | Cz | Cy | Izp | Iyp | rzp | ryp | Plastic Mod Xp | Plastic Mod Yp | Alpha |
|---|---|---|---|---|---|---|---|---|---|---|
| 1550 mm2 | 8600 mm4 | 15.8 mm | 125 mm | 13490000 mm4 | 743000 mm4 | 93.4 mm | 21.9 mm | 130000 mm3 | 23900 mm3 | 0 deg |
Materials and Design Standards 250x75x4
This section is typically designed using the design standard EN1993-1-3:2006 and is manufactured using a cold formed process as it is a steel section.
