400S125-18 Dimensions
The steel beam dimensions for the 400S125-18 section can be seen in the table. The depth of the section is 101.6 mm. The width of the section is 31.75 mm.
| Dimension | Value |
|---|---|
| Depth | 101.6 mm |
| Top Width | 31.75 mm |
| Top Thickness | 0.478 mm |
| Bottom Width | 31.75 mm |
| Bottom Thickness | 0.478 mm |
| Web Thickness | 0.478 mm |
| Fillet Radius | 0.478 mm |
| Lip Depth | 4.78 mm |
400S125-18 Section Properties
The 400S125-18 section has an area of 81mm2. The below table outlines the 400S125-18 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Izp | rzp | Iyp | ryp | J | Iw |
|---|---|---|---|---|---|---|
| 81 mm2 | 123000 mm4 | 39 mm | 8910 mm4 | 10.5 mm | 6.12 mm4 | 18100000 mm6 |
Materials and Design Standards 400S125-18
This section is typically designed using the design standard AISI S100-16 LSD and is manufactured using a cold formed process as it is a steel section.
