400S125-54 Dimensions
The steel beam dimensions for the 400S125-54 section can be seen in the table. The depth of the section is 101.6 mm. The width of the section is 31.75 mm.
| Dimension | Value |
|---|---|
| Depth | 101.6 mm |
| Top Width | 31.75 mm |
| Top Thickness | 1.438 mm |
| Bottom Width | 31.75 mm |
| Bottom Thickness | 1.438 mm |
| Web Thickness | 1.438 mm |
| Fillet Radius | 1.438 mm |
| Lip Depth | 4.78 mm |
400S125-54 Section Properties
The 400S125-54 section has an area of 236mm2. The below table outlines the 400S125-54 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Izp | rzp | Iyp | ryp | J | Iw |
|---|---|---|---|---|---|---|
| 236 mm2 | 348000 mm4 | 38.4 mm | 23600 mm4 | 10 mm | 162 mm4 | 47900000 mm6 |
Materials and Design Standards 400S125-54
This section is typically designed using the design standard AISI S100-16 LSD and is manufactured using a cold formed process as it is a steel section.
