400S300-54 Dimensions
The steel beam dimensions for the 400S300-54 section can be seen in the table. The depth of the section is 101.6 mm. The width of the section is 76.2 mm.
| Dimension | Value |
|---|---|
| Depth | 101.6 mm |
| Top Width | 76.2 mm |
| Top Thickness | 1.44 mm |
| Bottom Width | 76.2 mm |
| Bottom Thickness | 1.44 mm |
| Web Thickness | 1.44 mm |
| Fillet Radius | 1.44 mm |
| Lip Depth | 22.23 mm |
400S300-54 Section Properties
The 400S300-54 section has an area of 413.55mm2. The below table outlines the 400S300-54 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Izp | rzp | Iyp | ryp | J | Iw |
|---|---|---|---|---|---|---|
| 413.55 mm2 | 739227.01 mm4 | 42.27 mm | 354629.17 mm4 | 29.29 mm | 285.12 mm4 | 1025538474.32 mm6 |
Materials and Design Standards 400S300-54
This section is typically designed using the design standard AISI S100-12 LRFD and is manufactured using a cold formed process as it is a steel section.
