550S200-43 Dimensions
The steel beam dimensions for the 550S200-43 section can be seen in the table. The depth of the section is 139.7 mm. The width of the section is 50.8 mm.
| Dimension | Value |
|---|---|
| Depth | 139.7 mm |
| Top Width | 50.8 mm |
| Top Thickness | 1.15 mm |
| Bottom Width | 50.8 mm |
| Bottom Thickness | 1.15 mm |
| Web Thickness | 1.15 mm |
| Fillet Radius | 1.15 mm |
| Lip Depth | 15.88 mm |
550S200-43 Section Properties
The 550S200-43 section has an area of 302.58mm2. The below table outlines the 550S200-43 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Izp | rzp | Iyp | ryp | J | Iw |
|---|---|---|---|---|---|---|
| 302.58 mm2 | 911130.59 mm4 | 54.84 mm | 108636.4 mm4 | 18.95 mm | 132.36 mm4 | 454094150.32 mm6 |
Materials and Design Standards 550S200-43
This section is typically designed using the design standard AISI S100-12 LRFD and is manufactured using a cold formed process as it is a steel section.
