600S200-54 Dimensions
The steel beam dimensions for the 600S200-54 section can be seen in the table. The depth of the section is 152.4 mm. The width of the section is 50.8 mm.
| Dimension | Value |
|---|---|
| Depth | 152.4 mm |
| Top Width | 50.8 mm |
| Top Thickness | 1.44 mm |
| Bottom Width | 50.8 mm |
| Bottom Thickness | 1.44 mm |
| Web Thickness | 1.44 mm |
| Fillet Radius | 1.44 mm |
| Lip Depth | 15.88 mm |
600S200-54 Section Properties
The 600S200-54 section has an area of 395.48mm2. The below table outlines the 600S200-54 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Izp | rzp | Iyp | ryp | J | Iw |
|---|---|---|---|---|---|---|
| 395.48 mm2 | 1381472.1 mm4 | 59.11 mm | 136523.91 mm4 | 18.59 mm | 272.63 mm4 | 669459915.28 mm6 |
Materials and Design Standards 600S200-54
This section is typically designed using the design standard AISI S100-12 LRFD and is manufactured using a cold formed process as it is a steel section.
