600S300-54 Dimensions
The steel beam dimensions for the 600S300-54 section can be seen in the table. The depth of the section is 152.4 mm. The width of the section is 76.2 mm.
| Dimension | Value |
|---|---|
| Depth | 152.4 mm |
| Top Width | 76.2 mm |
| Top Thickness | 1.44 mm |
| Bottom Width | 76.2 mm |
| Bottom Thickness | 1.44 mm |
| Web Thickness | 1.44 mm |
| Fillet Radius | 1.44 mm |
| Lip Depth | 22.23 mm |
600S300-54 Section Properties
The 600S300-54 section has an area of 486.45mm2. The below table outlines the 600S300-54 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Izp | rzp | Iyp | ryp | J | Iw |
|---|---|---|---|---|---|---|
| 486.45 mm2 | 1857224.62 mm4 | 61.77 mm | 410404.19 mm4 | 29.03 mm | 335.48 mm4 | 2179168556.97 mm6 |
Materials and Design Standards 600S300-54
This section is typically designed using the design standard AISI S100-12 LRFD and is manufactured using a cold formed process as it is a steel section.
