800S300-54 Dimensions
The steel beam dimensions for the 800S300-54 section can be seen in the table. The depth of the section is 203.2 mm. The width of the section is 76.2 mm.
| Dimension | Value |
|---|---|
| Depth | 203.2 mm |
| Top Width | 76.2 mm |
| Top Thickness | 1.44 mm |
| Bottom Width | 76.2 mm |
| Bottom Thickness | 1.44 mm |
| Web Thickness | 1.44 mm |
| Fillet Radius | 1.44 mm |
| Lip Depth | 22.23 mm |
800S300-54 Section Properties
The 800S300-54 section has an area of 560mm2. The below table outlines the 800S300-54 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Izp | rzp | Iyp | ryp | J | Iw |
|---|---|---|---|---|---|---|
| 560 mm2 | 3603315.45 mm4 | 80.24 mm | 451611.1 mm4 | 28.4 mm | 385.85 mm4 | 3931902157.88 mm6 |
Materials and Design Standards 800S300-54
This section is typically designed using the design standard AISI S100-12 LRFD and is manufactured using a cold formed process as it is a steel section.
