250S250-54 Dimensions
The steel beam dimensions for the 250S250-54 section can be seen in the table. The depth of the section is 63.5 mm. The width of the section is 63.5 mm.
| Dimension | Value |
|---|---|
| Depth | 63.5 mm |
| Top Width | 63.5 mm |
| Top Thickness | 1.44 mm |
| Bottom Width | 63.5 mm |
| Bottom Thickness | 1.44 mm |
| Web Thickness | 1.44 mm |
| Fillet Radius | 1.44 mm |
| Lip Depth | 15.88 mm |
250S250-54 Section Properties
The 250S250-54 section has an area of 303.87mm2. The below table outlines the 250S250-54 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Izp | rzp | Iyp | ryp | J | Iw |
|---|---|---|---|---|---|---|
| 303.87 mm2 | 218105.27 mm4 | 26.67 mm | 171487.35 mm4 | 23.75 mm | 209.36 mm4 | 208920904.17 mm6 |
Materials and Design Standards 250S250-54
This section is typically designed using the design standard AISI S100-12 LRFD and is manufactured using a cold formed process as it is a steel section.
