400S250-54 Dimensions
The steel beam dimensions for the 400S250-54 section can be seen in the table. The depth of the section is 101.6 mm. The width of the section is 63.5 mm.
| Dimension | Value |
|---|---|
| Depth | 101.6 mm |
| Top Width | 63.5 mm |
| Top Thickness | 1.44 mm |
| Bottom Width | 63.5 mm |
| Bottom Thickness | 1.44 mm |
| Web Thickness | 1.44 mm |
| Fillet Radius | 1.44 mm |
| Lip Depth | 15.88 mm |
400S250-54 Section Properties
The 400S250-54 section has an area of 358.71mm2. The below table outlines the 400S250-54 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Izp | rzp | Iyp | ryp | J | Iw |
|---|---|---|---|---|---|---|
| 358.71 mm2 | 628509.45 mm4 | 41.91 mm | 203953.4 mm4 | 23.83 mm | 247.24 mm4 | 488735277.1 mm6 |
Materials and Design Standards 400S250-54
This section is typically designed using the design standard AISI S100-12 LRFD and is manufactured using a cold formed process as it is a steel section.
