400S250-68 Dimensions
The steel beam dimensions for the 400S250-68 section can be seen in the table. The depth of the section is 101.6 mm. The width of the section is 63.5 mm.
| Dimension | Value |
|---|---|
| Depth | 101.6 mm |
| Top Width | 63.5 mm |
| Top Thickness | 1.81 mm |
| Bottom Width | 63.5 mm |
| Bottom Thickness | 1.81 mm |
| Web Thickness | 1.81 mm |
| Fillet Radius | 1.81 mm |
| Lip Depth | 15.88 mm |
400S250-68 Section Properties
The 400S250-68 section has an area of 447.1mm2. The below table outlines the 400S250-68 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Izp | rzp | Iyp | ryp | J | Iw |
|---|---|---|---|---|---|---|
| 447.1 mm2 | 774190.45 mm4 | 41.66 mm | 249322.62 mm4 | 23.6 mm | 486.99 mm4 | 598834982.38 mm6 |
Materials and Design Standards 400S250-68
This section is typically designed using the design standard AISI S100-12 LRFD and is manufactured using a cold formed process as it is a steel section.
