550S200-54 Dimensions
The steel beam dimensions for the 550S200-54 section can be seen in the table. The depth of the section is 139.7 mm. The width of the section is 50.8 mm.
| Dimension | Value |
|---|---|
| Depth | 139.7 mm |
| Top Width | 50.8 mm |
| Top Thickness | 1.44 mm |
| Bottom Width | 50.8 mm |
| Bottom Thickness | 1.44 mm |
| Web Thickness | 1.44 mm |
| Fillet Radius | 1.44 mm |
| Lip Depth | 15.88 mm |
550S200-54 Section Properties
The 550S200-54 section has an area of 377.42mm2. The below table outlines the 550S200-54 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Izp | rzp | Iyp | ryp | J | Iw |
|---|---|---|---|---|---|---|
| 377.42 mm2 | 1127987.16 mm4 | 54.61 mm | 133194.06 mm4 | 18.77 mm | 259.73 mm4 | 555869243.74 mm6 |
Materials and Design Standards 550S200-54
This section is typically designed using the design standard AISI S100-12 LRFD and is manufactured using a cold formed process as it is a steel section.
