550S250-54 Dimensions
The steel beam dimensions for the 550S250-54 section can be seen in the table. The depth of the section is 139.7 mm. The width of the section is 63.5 mm.
| Dimension | Value |
|---|---|
| Depth | 139.7 mm |
| Top Width | 63.5 mm |
| Top Thickness | 1.44 mm |
| Bottom Width | 63.5 mm |
| Bottom Thickness | 1.44 mm |
| Web Thickness | 1.44 mm |
| Fillet Radius | 1.44 mm |
| Lip Depth | 15.88 mm |
550S250-54 Section Properties
The 550S250-54 section has an area of 413.55mm2. The below table outlines the 550S250-54 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Izp | rzp | Iyp | ryp | J | Iw |
|---|---|---|---|---|---|---|
| 413.55 mm2 | 1302804.36 mm4 | 56.13 mm | 227678.59 mm4 | 23.44 mm | 285.12 mm4 | 937190174.22 mm6 |
Materials and Design Standards 550S250-54
This section is typically designed using the design standard AISI S100-12 LRFD and is manufactured using a cold formed process as it is a steel section.
