550S250-68 Dimensions
The steel beam dimensions for the 550S250-68 section can be seen in the table. The depth of the section is 139.7 mm. The width of the section is 63.5 mm.
| Dimension | Value |
|---|---|
| Depth | 139.7 mm |
| Top Width | 63.5 mm |
| Top Thickness | 1.81 mm |
| Bottom Width | 63.5 mm |
| Bottom Thickness | 1.81 mm |
| Web Thickness | 1.81 mm |
| Fillet Radius | 1.81 mm |
| Lip Depth | 15.88 mm |
550S250-68 Section Properties
The 550S250-68 section has an area of 516.13mm2. The below table outlines the 550S250-68 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Izp | rzp | Iyp | ryp | J | Iw |
|---|---|---|---|---|---|---|
| 516.13 mm2 | 1610815.62 mm4 | 55.88 mm | 278458.82 mm4 | 23.22 mm | 566.07 mm4 | 1146648150.13 mm6 |
Materials and Design Standards 550S250-68
This section is typically designed using the design standard AISI S100-12 LRFD and is manufactured using a cold formed process as it is a steel section.
