550SFT200-D20 Dimensions
The steel beam dimensions for the 550SFT200-D20 section can be seen in the table. The depth of the section is 139.7 mm. The width of the section is 50.8 mm.
| Dimension | Value |
|---|---|
| Depth | 139.7 mm |
| Top Width | 50.8 mm |
| Top Thickness | 0.48 mm |
| Bottom Width | 50.8 mm |
| Bottom Thickness | 0.48 mm |
| Web Thickness | 0.48 mm |
| Fillet Radius | 2.14 mm |
550SFT200-D20 Section Properties
The 550SFT200-D20 section has an area of 115.48mm2. The below table outlines the 550SFT200-D20 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Izp | rzp | Iyp | ryp | J | Iw |
|---|---|---|---|---|---|---|
| 115.48 mm2 | 354212.94 mm4 | 55.42 mm | 28303.74 mm4 | 15.65 mm | 8.74 mm4 | 102043629.29 mm6 |
Materials and Design Standards 550SFT200-D20
This section is typically designed using the design standard AISI S100-12 LRFD and is manufactured using a cold formed process as it is a steel section.
