200E20 Dimensions
The steel beam dimensions for the 200E20 section can be seen in the table. The depth of the section is 200 mm. The width of the section is 90 mm.
| Dimension | Value |
|---|---|
| Depth | 200 mm |
| Top Width | 90 mm |
| Top Thickness | 2 mm |
| Bottom Width | 90 mm |
| Bottom Thickness | 2 mm |
| Web Thickness | 2 mm |
| Fillet Radius | 3 mm |
| Lip Depth | 19 mm |
200E20 Section Properties
The 200E20 section has an area of 810mm2. The below table outlines the 200E20 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Iyp | Izp | Cz | Cy | ryp | rzp |
|---|---|---|---|---|---|---|
| 810 mm2 | 5329000 mm4 | 886000 mm4 | 27.6 mm | 100 mm | 80.6 mm | 32.9 mm |
Materials and Design Standards 200E20
This section is typically designed using the design standard EN1993-1-3:2006 and is manufactured using a cold formed process as it is a steel section.
