230E25 Dimensions
The steel beam dimensions for the 230E25 section can be seen in the table. The depth of the section is 230 mm. The width of the section is 90 mm.
| Dimension | Value |
|---|---|
| Depth | 230 mm |
| Top Width | 90 mm |
| Top Thickness | 2.5 mm |
| Bottom Width | 90 mm |
| Bottom Thickness | 2.5 mm |
| Web Thickness | 2.5 mm |
| Fillet Radius | 3.75 mm |
| Lip Depth | 19 mm |
230E25 Section Properties
The 230E25 section has an area of 1079mm2. The below table outlines the 230E25 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Iyp | Izp | Cz | Cy | ryp | rzp |
|---|---|---|---|---|---|---|
| 1079 mm2 | 9093000 mm4 | 1135000 mm4 | 25.8 mm | 115 mm | 91.1 mm | 32.2 mm |
Materials and Design Standards 230E25
This section is typically designed using the design standard EN1993-1-3:2006 and is manufactured using a cold formed process as it is a steel section.
