330E30 Dimensions
The steel beam dimensions for the 330E30 section can be seen in the table. The depth of the section is 330 mm. The width of the section is 90 mm.
| Dimension | Value |
|---|---|
| Depth | 330 mm |
| Top Width | 90 mm |
| Top Thickness | 3 mm |
| Bottom Width | 90 mm |
| Bottom Thickness | 3 mm |
| Web Thickness | 3 mm |
| Fillet Radius | 4.5 mm |
| Lip Depth | 22 mm |
330E30 Section Properties
The 330E30 section has an area of 1603mm2. The below table outlines the 330E30 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | Iyp | Izp | Cz | Cy | ryp | rzp |
|---|---|---|---|---|---|---|
| 1603 mm2 | 25589000 mm4 | 1562000 mm4 | 22 mm | 165 mm | 125.4 mm | 31 mm |
Materials and Design Standards 330E30
This section is typically designed using the design standard EN1993-1-3:2006 and is manufactured using a cold formed process as it is a steel section.
