100x75x20x3.0 Dimensions
The steel beam dimensions for the 100x75x20x3.0 section can be seen in the table. The depth of the section is 100 mm. The width of the section is 75 mm.
| Dimension | Value |
|---|---|
| Depth | 100 mm |
| Top Width | 75 mm |
| Top Thickness | 3 mm |
| Bottom Width | 75 mm |
| Bottom Thickness | 3 mm |
| Web Thickness | 3 mm |
| Fillet Radius | 3 mm |
| Lip Depth | 20 mm |
100x75x20x3.0 Section Properties
The 100x75x20x3.0 section has an area of 803mm2. The below table outlines the 100x75x20x3.0 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | J | Iyp | Izp |
|---|---|---|---|
| 803 mm2 | 2410 mm4 | 614000 mm4 | 1340000 mm4 |
Materials and Design Standards 100x75x20x3.0
This section is typically designed using the design standard EN1993-1-3:2006 and is manufactured using a cold formed process as it is a steel section.
