75x50x20x3.0 Dimensions
The steel beam dimensions for the 75x50x20x3.0 section can be seen in the table. The depth of the section is 75 mm. The width of the section is 50 mm.
| Dimension | Value |
|---|---|
| Depth | 75 mm |
| Top Width | 50 mm |
| Top Thickness | 3 mm |
| Bottom Width | 50 mm |
| Bottom Thickness | 3 mm |
| Web Thickness | 3 mm |
| Fillet Radius | 3 mm |
| Lip Depth | 20 mm |
75x50x20x3.0 Section Properties
The 75x50x20x3.0 section has an area of 578mm2. The below table outlines the 75x50x20x3.0 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| A | J | Iyp | Izp |
|---|---|---|---|
| 578 mm2 | 1730 mm4 | 204000 mm4 | 500000 mm4 |
Materials and Design Standards 75x50x20x3.0
This section is typically designed using the design standard EN1993-1-3:2006 and is manufactured using a cold formed process as it is a steel section.
