DT765H Dimensions
The steel beam dimensions for the DT765H section can be seen in the table. The depth of the section is 76 mm. The width of the section is 50 mm.
| Dimension | Value |
|---|---|
| Depth | 76 mm |
| Top Width | 50 mm |
| Top Thickness | 0.55 mm |
| Bottom Width | 50 mm |
| Bottom Thickness | 0.55 mm |
| Web Thickness | 0.55 mm |
| Fillet Radius | 0.55 mm |
DT765H Section Properties
The DT765H section has an area of 96.8mm2. The below table outlines the DT765H section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| Cz | A | Izp | Iyp | rzp | ryp | Iw | J |
|---|---|---|---|---|---|---|---|
| 14.94 mm | 96.8 mm2 | 102200 mm4 | 25138 mm4 | 32.49 mm | 16.11 mm | 27590000 mm6 | 9.76 mm4 |
Materials and Design Standards DT765H
This section is typically designed using the design standard AS 4600-2005 and is manufactured using a cold formed process as it is a steel section.
