DT925H Dimensions
The steel beam dimensions for the DT925H section can be seen in the table. The depth of the section is 92 mm. The width of the section is 50 mm.
| Dimension | Value |
|---|---|
| Depth | 92 mm |
| Top Width | 50 mm |
| Top Thickness | 0.55 mm |
| Bottom Width | 50 mm |
| Bottom Thickness | 0.55 mm |
| Web Thickness | 0.55 mm |
| Fillet Radius | 0.55 mm |
DT925H Section Properties
The DT925H section has an area of 105.6mm2. The below table outlines the DT925H section properties including the torsion constant as well as moment of inertia and plastic modulus properties.
| Cz | A | Izp | Iyp | rzp | ryp | Iw | J |
|---|---|---|---|---|---|---|---|
| 13.81 mm | 105.6 mm2 | 154760 mm4 | 26530 mm4 | 38.28 mm | 15.85 mm | 42510000 mm6 | 10.65 mm4 |
Materials and Design Standards DT925H
This section is typically designed using the design standard AS 4600-2005 and is manufactured using a cold formed process as it is a steel section.
